Fixing scratches on Gorilla Glass (found in smartphones, tablets, and other devices) can be challenging since this glass is designed to be highly resistant to scratches. However, if you have a minor scratch, there are methods to minimize its appearance. While these methods won’t completely remove deep scratches, they can help improve the look.
1. Assess the Depth of the Scratch
Before starting any fix, determine how deep the scratch is:
- Light scratches are often surface-level and can be fixed with simple methods.
2. Use a Screen Protector
Best for: Light scratches
A tempered glass screen protector can help conceal minor scratches and prevent further damage.
Steps:
- Clean the screen thoroughly using a microfiber cloth and isopropyl alcohol.
- Apply a tempered glass protector carefully over the scratched area.
- Press from the center outward to remove any air bubbles.
This method won’t fix the scratches but can mask them and protect the glass from further harm.
3. Try a Scratch Removal Paste (For Light Scratches)
Products like cerium oxide or other glass polishing pastes may reduce the appearance of scratches on Gorilla Glass.
Steps:
- Apply a small amount of cerium oxide paste or glass polishing paste to a microfiber cloth.
- Rub the paste gently over the scratched area in circular motions for a few minutes.
- Wipe the paste off with a clean cloth and check the result.
This method is effective for surface-level scratches but won’t work on deep or functional damage.
4. Use Toothpaste (For Very Light Scratches)
Best for: Superficial scratches
Toothpaste can serve as a mild abrasive to polish light scratches on the surface.
Steps:
- Apply a small amount of non-gel toothpaste to a microfiber cloth.
- Gently rub it in circular motions over the scratch for 30–60 seconds.
- Wipe off the toothpaste with a damp cloth.
- Dry with a clean microfiber cloth and check for improvement.
Note: This is a temporary fix and will not work for deep or significant scratches.
5. Use Baking Soda Paste (For Very Light Scratches)
Best for: Superficial, light scratches
Baking soda is another mild abrasive that can help polish very light scratches.
Steps:
- Mix baking soda with a small amount of water to form a paste.
- Apply the paste to a microfiber cloth and gently rub it over the scratched area.
- Wipe off the paste with a damp cloth and dry the screen with a microfiber cloth.
Note: Like toothpaste, this method works best for minor surface scratches.
6. Seek Professional Repair or Replacement (For Deep Scratches)
If the scratch is deep or if the screen is unresponsive, DIY fixes will likely not work. In these cases, professional help is required.
Options:
- Consider a screen replacement if the scratch has significantly damaged the device.
7. Prevention Tips for Future Scratches
To avoid scratches in the future:
- Always use a screen protector to safeguard the glass.
- Keep your device in a case to shield it from impacts.
- Avoid placing your device on rough surfaces or near sharp objects.
Conclusion
While Gorilla Glass is designed to be tough, scratches can still occur. For light scratches, using a screen protector, polishing paste, or toothpaste may help. However, for deeper scratches or functional issues, professional repair is the best solution.
Alos Read : Sony Bloggie 3D Player Battery Replacement Guide
